Q-HAPI Stabilization System
- ICAO annex 14, CAP437
Certificates
Technical details
Datasheet, Manuals and Drawings
Details Q-HAPI Stabilization System
The Q72SP03-R1 is designed primarily for the Q-HAPI system. it stabilizes on the Bank (X) and Elevation (Y) axis so that the mounting arm with its Q-HAPI System will always stay level, regardless of the motions of the vessel.
The gyro-stabilized platforms are built around a rugged pan and tilt mechanism. This high resolution digital system uses the best wide bandwidth, low noise, solid-state gyros. The whole system is user configurable.
• High Stability
• High Reliability
• Low Cost
• Low Noise
• Two Year Limited Warranty
• Engineering Support
Order code Q-HAPI Stabilization System
Q72SP03-R1The gyro-stabilized platforms are built around a rugged pan and tilt mechanism. This high resolution digital system uses the best wide bandwidth, low noise, solid-state gyros. The whole system is user configurable.
Additional Information
Product Specifications Q-HAPI Stabilization System
Size and Dimension
| Article Number: | Q72SP03 |
| Manufacturer: | Q-Aviation B.V. |
| HS-Code: | 94054039 |
| Warranty: | 2 years |
| Application: | Helideck |
| Hazardous area: | Safe Area |
| Range bank elevation: | ±30° (Electronic) |
| Slew rate bank elevation: | ±45°/sec |
| Attitude accuracy static: | ±1.5° |
| Attitude accuracy dynamic: | ±3.0° |
| Noise: | 0.1° rms |
| Stability: | ±1.5° |
| Temperature operating: | -20°C to +50°C |
| Vibration operating: | 0.2 g rms |
| Vibration survival: | 0.5 g rms |
| Startup time operational: | 5 seconds |
| Startup time full performance: | 90 seconds |
| Size incl mounting flanges: | 29.2x94.5x26.6 (cm) |
| Connection: | MS3102A-20-7P |
| Base mounting holes: | Qty 8 (4 x M6 threaded; 4 x M6 clearance) |
| Payload mounting holes: | Qty 8 (M6 clearance) |
| Enclosure: | Steel, Powder coated |
| Mounting: | Rigid, 6x M10 |
| Input Voltage: | 24-28 VDC |
| Tested Ambient Temp: | -20°C to + 50°C |
| Consumption: | 56 Watt |
| Life expectancy: | 100.000+ hours |
| Ingress Protection: | IP67 |
| In Compliance With: | ICAO annex 14, CAP437 |
| Weight: | 31.8Kg without bracket |
| Dimension: | 958x685x497mm (LxWxH) |
| Dimension Packaging: | 1200x800x600mm (LxWxH) |
